Elbows, tees, reducers, caps, stub ends, laterals and bends — manufactured in Carbon Steel, Alloy Steel and Stainless Steel to ASME B16.9, EN 10253-2 Type B and all major international standards. Sizes ½″ (DN15) through 60″ (DN1500), schedules SCH 5S to XXH. Every heat traceable to EN 10204 3.1 material certification.
All fittings are manufactured at our 92,000 sq.ft. facility in Faridabad, Haryana — wall thicknesses from SCH 5S to XXH across the full size range.
45°, 90° and 180° Return Elbows in Long Radius (1.5D) and Short Radius (1D). Equal and reducing configurations available across all schedules.
Equal tees and reducing tees for branch connections. Available in straight and reducing outlet sizes across all pressure schedules.
Concentric reducers for balanced flow and eccentric reducers for horizontal pipe runs, draining service and pump suctions.
Pipe caps for line termination and lap-joint stub ends for use with lap-joint flanges — Short Pattern (MSS) and Long Pattern available.
45° laterals and equal-leg crosses for complex piping configurations. Manufactured to heavy-wall schedules for high-pressure service.
3D and 5D bends for low-pressure-drop piping, slug-flow lines and pigging-friendly systems. Custom radii on enquiry.
Every heat supplied with EN 10204 3.1 mill test certificate. PMI and NACE MR0175 compliance on request.
Our fittings are dimensionally manufactured to ASME and EN standards and are interchangeable within the same standard. Each order is reviewed by our QA team against the applicable standard revision before production commences.
ASME B16.9
Factory-Made Wrought Buttwelding Fittings — the primary standard for elbows, tees, reducers, caps and stub ends.
ASME B16.28
Short Radius Elbows and Returns — governs SR 90° and SR 180° return bend geometry.
EN 10253-2 Type A & Type B
European standard for buttwelding fittings. Type B (tighter tolerances) required for PED-scoped pressure systems. Supplied with EN 10204 3.1 MTC.
MSS SP-43 & MSS SP-75
SP-43 covers light-wall (stainless) stub ends; SP-75 covers high-test wrought buttwelding fittings for high-pressure gas and oil piping.
ASME B31.3 & B31.1
Process Piping (B31.3) and Power Piping (B31.1) design codes that reference B16.9 fittings. All our fittings are fully compliant.
ASME B16.49
Factory-Made Wrought Steel Induction Bends for Transportation and Distribution Systems (3D / 5D long-radius bends).
Standard stock covers ½″ through 24″ in common schedules. Sizes up to 60″ and heavy-wall specials are manufactured to order with typical lead times of 4–8 weeks.
| NPS Range | DN Range | Schedules Available |
|---|---|---|
| ½″ – 2″ | DN15 – DN50 | SCH 5S, 10S, 10, 40, 80, 160, XXH |
| 2½″ – 6″ | DN65 – DN150 | SCH 5S through XXH |
| 8″ – 24″ | DN200 – DN600 | SCH 5S, 10, 20, 40, 60, 80, 100, 120, 140, 160, XXH |
| 26″ – 60″ | DN650 – DN1500 | Custom wall thickness per order |
60″
Maximum NPS (DN1500)
3.1 MTC
EN 10204 on every heat
30+
Export countries
2010
Manufacturing since
Share your material, size, schedule, standard and quantity. Our technical sales team will respond within one business day with a firm offer including EN 10204 3.1 documentation.
Mon–Sat 10:00–19:00 IST · +91-022-4481-8932 · +91-8879632275
