EN 10204 3.1 standard on every order. Manufactured at our group facility holding ISO, PED (TÜV), AD 2000, IBR and ASME approvals (download certificates). Full heat and lot traceability from raw material to finished fitting.
| Certificate | Standard | Issued By | When Required |
|---|---|---|---|
| EN 10204 2.2 | Test report — typical values, not lot-specific | Manufacturer | Non-critical utility piping |
| EN 10204 3.1 | Inspection certificate — lot-specific, manufacturer-signed | Manufacturer QC | Standard — all EN 10253-2 / -4 Type B orders |
| EN 10204 3.2 | Inspection certificate — countersigned by independent TPI | TÜV / Lloyd's / BV | PED Category III/IV, sour service, nuclear-adjacent |
Fittings are manufactured at our group manufacturing facility, Arshya Engineers & Fabrications Pvt Ltd (Village Dundsa, Palwal, Haryana, India), which holds ISO, PED (TÜV), AD 2000, IBR and ASME approvals. The certificates are issued to that facility. Download the current copies for your vendor file. You can verify the PED / AD 2000 material manufacturer certificate of our group manufacturing facility independently in TÜV Rheinland's Certipedia database.
| Certificate | Issued by | Number | Valid to | Copy |
|---|---|---|---|---|
| ISO 9001:2015 Quality management system | Amtivo | 622103 | 27-10-2026 | |
| ISO 14001:2015 Environmental management system | ICV | IN/93811566/2852 | 18-01-2027 | |
| ISO 45001:2018 Occupational health and safety | ICV | IN/51816033/4859 | 22-12-2027 | |
| PED 2014/68/EU Material manufacturer QMS certificate for forged and butt-weld fittings and flanges (test basis EN 764-5 and AD 2000-Merkblatt W0) | TÜV Rheinland, notified body 0035 | 01 202 IND/Q-15 0006.02 | 08-03-2027 | PDF Verify on TÜV Rheinland Certipedia |
| PED annex, rev 2 Material scope: EN 10253-2 / -4 and ASTM grades | TÜV Rheinland | Annex to 01 202 IND/Q-15 0006.02 | Dated 24-11-2025 | |
| AD 2000-Merkblatt HP 0 Manufacturer qualification, German pressure vessel code | Euroglobe | 183915 | 16-04-2027 | |
| EN 764-5:2014 Inspection documentation of metallic materials for pressure equipment | Euroglobe | 183916 | 16-04-2027 | |
| IBR approval Granted under IBR 1950 (Forms III-A, III-C and III-G). IBR 2026 applies from 1 October 2026: fittings are certified in Form IV (Part D), formerly Form III-C | Chief Inspector of Boilers, Haryana | Memo 187 | Issued 02-07-2020 | |
| ASME U-Stamp ASME pressure vessel certificate of authorisation | ASME | 61123 | 25-10-2026 |
Material manufacturer QMS certificate under the Pressure Equipment Directive, issued by TÜV Rheinland (notified body 0035) to our group manufacturing facility. Test basis EN 764-5 and AD 2000-Merkblatt W0. Covers forged and butt-weld fittings and flanges in EN 10253-2 / -4 and ASTM grades.
Sour service (H₂S) compliance for offshore and upstream applications. Hardness testing per NACE limits on duplex, super duplex, and alloy steel fittings. HRC/HBW hardness certificate available per heat/lot.
XRF (X-ray fluorescence) PMI on alloy steel and stainless/nickel alloy fittings. PMI verification report per heat or per piece as required. Critical for preventing material mix-ups in high-alloy grades (P91, duplex, Inconel).
Quality management system certified. Full heat traceability from mill certificate through forming, PWHT (where applicable), testing, and despatch. Document package available per shipment.
TÜV, Lloyd's Register, Bureau Veritas (BV), DNV, Apave — witness inspection and certificate countersignature available on request. Inspector access to all stages: incoming material, forming, PWHT, dimensional inspection, final NDE.
Post-weld heat treatment (PWHT) is mandatory for all CrMo grades (P11, P22, P5, P9, P91, P92). Time-temperature chart and hardness test results provided on EN 10204 3.1 certificate for all CrMo fittings.
FN report for 1.4404 and 1.4435 austenitic SS — mandatory for pharmaceutical WFI piping per ISPE/EU Annex 1.
Charpy V-notch at −196°C for 304L/316L in LNG service. Values reported per heat.
Ra ≤0.8 µm (32 µin) for pharmaceutical and food-grade stainless fittings. Ra report per fitting on request.
Hydro test per EN 10253-2 / -4 / ASME B16.9 pressure calculations. Test certificate available.
Radiography, ultrasonic, liquid penetrant, magnetic particle per customer or code requirement.
870–900°C stress-relief for HF alkylation service per API 751. Documented on 3.1 certificate.
Tell us your inspection level, third-party inspector, and special test requirements. We will confirm availability and include all requirements in the quotation.
Contact Us