Part of the Arshya Group: IBR Fittings (ibrfittings.com) • Arshya Fittings (arshyafittings.com)
Arshya Pipe Fittings
Arshya Pipe Fittings
EN 10253 Type B Specialists
EN 10253 Type B Available ASME B16.9

Buttweld Pipe Tees

Equal Tees  |  Reducing Tees  |  ASME B16.9  |  EN 10253 Type A & B

Manufacturer and exporter of equal and reducing buttweld tees in all material grades. ASME B16.9 and EN 10253 Type A & Type B. Carbon Steel, Alloy Steel, Stainless Steel, Nickel Alloys. EN 10204 3.1/3.2 MTR. PED 2014/68/EU certified. Ships to Europe, UK, Middle East.

Request Quote EN 10253 Type B Guide

Range at a Glance

TypesEqual & Reducing
Size½" – 48" NPS
ScheduleSCH 10 – XXS
ASME Std.B16.9
EN Std.EN 10253-1/-2/-3/-4
EN Type BAvailable ✓
MTR3.1 std / 3.2 on request

Tee Types

⊤

Equal Tee (Straight Tee)

All three outlets are the same bore size. The run pipe and branch pipe are of equal diameter. Used where the full flow is split or combined at 90°.

  • ✓ ASME B16.9 — e.g. 4" × 4" × 4"
  • ✓ EN 10253 Type A & Type B
  • ✓ Full bore — no flow restriction
⊤↓

Reducing Tee

The branch outlet is smaller than the run pipe. Designated as Run × Run × Branch (e.g. 6" × 6" × 4"). Used for take-off to smaller sub-headers.

  • ✓ ASME B16.9 — all standard reducing combinations
  • ✓ EN 10253 Type A & Type B
  • Note: specify run size × branch size

Available Material Grades

Carbon Steel

  • ASTM A234 WPB / WPB-W
  • WPL6 (LTCS −46°C)
  • WPL3 (LNG −100°C)
  • EN: 1.0345 / 1.0425 / 1.0473

Alloy Steel (CrMo)

  • WP91 / 1.4903 (P91)
  • WP92 / 1.4901 (P92)
  • WP22 / 1.7380 (P22)
  • WP11 / 1.7335 (P11)
  • WP5 / WP9

Stainless Steel

  • WP316L / 1.4404
  • 316Ti / 1.4571
  • WP304L / 1.4307
  • WP321 / 1.4541
  • Duplex 1.4462 / SD 1.4410

Nickel Alloys

  • Hastelloy C-276 / 2.4819
  • Inconel 625 / 2.4856
  • Incoloy 825 / 2.4858
  • Monel 400 / 2.4360
  • Inconel 600 / 2.4816

EN 10253 Type B Tees — PED Category III–IV

Type B tees have heavier nominal wall, tighter tolerances, orbital-weld bevel, and mandatory EN 10204 3.1 MTR. Specify "EN 10253 Type B" explicitly in your RFQ if PED Category III–IV applies. Arshya is one of very few Indian manufacturers certified for Type B across all material families.

Type A vs Type B full comparison →

Related Fitting Types

Elbows (45°/90°/180°)
LR & SR — ASME B16.9 / B16.28
Reducers
Concentric & Eccentric
Pipe Caps
ASME B16.9 / EN 10253
Laterals
45° Laterals — ASME B16.9

Request Tee Quote

Specify type (equal/reducing), grade, standard, size